Whether you’re heading to Cornwall with your surfboard, exploring Scotland with a kayak or preparing for a European road trip, having enough storage space in your campervan can make a big difference.
Unfortunately, even well-designed campervan conversions have limited room for bulky outdoor equipment.
That’s where campervan roof racks and roof bars come in.
A suitable roof rack system allows you to transport compatible equipment above your vehicle, freeing up valuable space inside.
However, choosing the right system isn’t always straightforward, particularly if your campervan has an elevating pop-top roof.
In this guide, we’ll explain the different types of campervan roof racks, explore Thule and Reimo mounting systems, and cover the important weight and installation considerations.
1. Can You Fit a Roof Rack to a Campervan?
Yes, many campervans can accommodate roof bars or roof racks, provided the vehicle and roof structure are suitable.
The available options depend on several factors:
- Vehicle make, model and generation.
- Fixed roof or elevating pop-top roof.
- Existing factory mounting points.
- Roof shape and construction.
- Permitted roof load.
- Type and weight of equipment being carried.
Some fixed-roof vans have dedicated roof rack mounting points, while others require vehicle-specific fitting kits.
Pop-top campervans often need specially designed mounting arrangements that are compatible with the elevating roof.
Never assume that a roof rack designed for a standard van will also be suitable after a pop-top conversion.
2. Fixed-Roof vs Pop-Top Campervan Roof Racks
The type of roof fitted to your campervan is one of the most important considerations.
Fixed-Roof Campervans
Fixed-roof vans may have factory-approved roof rack mounting points.
Depending on the vehicle, these can accommodate compatible roof bars, roof racks and equipment carriers.
However, the correct fitting kit and maximum permitted load must still be confirmed.
Pop-Top Campervans
An elevating roof introduces additional considerations.
Pop-top roofs are designed to lift and lower, and their construction differs from a conventional metal vehicle roof.
Adding roof bars or equipment can affect:
- Roof lifting performance.
- Gas struts or lifting mechanisms.
- Roof seals and alignment.
- Vehicle stability.
- Overall roof load capacity.
A pop-top roof should only carry equipment when the roof manufacturer approves the particular mounting arrangement.
The weight of roof bars, brackets and accessories must also be included when calculating the total load.
3. Thule WingBar Evo: Aerodynamic Campervan Roof Bars
Thule is a well-known manufacturer of roof rack systems and vehicle accessories.
Its WingBar Evo range is designed to provide a practical mounting platform for compatible equipment carriers.
UK Leisure Parts supplies the Thule WingBar Evo 135cm.
These aerodynamic load bars are available in black and silver finishes and are supplied as a two-bar pack.
Benefits of Aerodynamic Roof Bars
Compared with some traditional square-section roof bars, aerodynamic designs can help reduce wind noise.
They also provide a convenient platform for compatible accessories.
Potential uses include:
- Surfboard carriers.
- Kayak carriers.
- Roof boxes.
- Outdoor equipment mounts.
- Other approved roof rack accessories.
The bars themselves are only one part of a complete system.
You will also need suitable feet, fitting kits or mounting rails, depending on the vehicle.
4. Reimo Active Rails for Campervan Roof Racks
Reimo Active Rails provide a mounting arrangement for suitable campervan roof rack installations.
UK Leisure Parts supplies Reimo Active Rails in 2-metre lengths.
The product listing specifies that two rails are required for a complete installation.
These rails are designed to provide attachment points for compatible roof bars and mounting hardware.
Why Choose Active Rails?
Active Rails can be useful when a suitable campervan roof doesn’t have conventional factory roof rack mounting points.
They provide a dedicated mounting interface for compatible components.
However, installation suitability must be confirmed with the roof manufacturer.
The presence of an Active Rail doesn’t automatically mean the roof can safely support any particular load.
5. Thule Roof Rack with Reimo Active Rails
For owners looking for a complete system, UK Leisure Parts offers the Thule WingBar Roof Rack with Reimo Active Rails.
This package combines several compatible mounting components.
According to the product listing, the package includes:
- Two Reimo Active Rails.
- Four Active Rail mounting brackets.
- Thule 710700 fixing-point feet and 187009 fitting components.
- Thule WingBar Evo 135cm roof bars.
Black and silver WingBar finishes are available.
The package is marketed for Reimo elevating roofs, making it particularly relevant to campervan conversions fitted with these systems.
Before purchasing, confirm compatibility with your specific roof model, its installation and the equipment you intend to carry.
It’s also important to check whether the roof may be raised with any load attached.
6. Understanding Campervan Roof Rack Weight Limits
Roof load limits are one of the most important safety considerations.
There isn’t a single maximum weight that applies to every campervan.
The permitted load depends on the vehicle, roof structure, rack system and installation.
Dynamic Roof Load
The dynamic load is the weight permitted on the roof while the vehicle is moving.
This includes the weight of the roof bars, feet, brackets and everything being carried.
For example, if a roof system has a confirmed dynamic load limit of 50kg and the complete rack assembly weighs 10kg, only 40kg remains for equipment.
This is an illustration, not a load rating for any specific product.
Static Roof Load
Static load refers to the weight a roof can support while the vehicle is stationary.
Some roof systems have different static and dynamic ratings.
However, a higher static rating does not mean you can carry that weight while driving.
Pop-Top Lifting Limits
A pop-top roof may also have a separate limit for how much weight can remain attached when raising or lowering it.
This may be lower than the permitted driving load.
Always follow the lowest applicable limit and the roof manufacturer’s operating instructions.
7. Carrying Surfboards, Kayaks and Outdoor Equipment
Roof racks can be particularly useful for campervan owners who enjoy outdoor activities.
Surfboards
Surfboards are relatively lightweight compared with some other equipment, but their length and shape can create significant wind resistance.
Use a suitable carrier or protective supports and approved securing straps.
Kayaks
Kayaks can be bulky and awkward to lift onto a campervan roof.
A compatible kayak carrier may make transport easier.
Check the kayak’s weight, the carrier’s rating and the roof rack’s permitted load.
Roof Boxes
Roof boxes provide enclosed storage for suitable lightweight equipment.
However, the weight of the box itself counts towards the roof load limit.
A roof box also increases vehicle height and may affect fuel consumption.
Other Equipment
Some roof rack systems can accommodate specialist carriers for sports equipment.
Always confirm that the accessory is approved for the specific bars and mounting system.
8. Roof Racks and Pop-Top Roof Operation
One common question is whether you can raise a pop-top roof with roof bars or equipment attached.
The answer depends entirely on the roof system.
Some elevating roofs may permit a limited additional load when raised, while others require equipment to be removed first.
Even where the roof structure can support a load, the lifting mechanism may not be designed to raise that weight.
Important Checks
Before operating your pop-top roof:
- Confirm the manufacturer’s permitted raised-roof load.
- Include the weight of bars, brackets and equipment.
- Check whether the lifting mechanism is approved for the additional weight.
- Ensure nothing obstructs the roof’s movement.
- Follow the manufacturer’s opening and closing instructions.
Never force a roof that feels unusually heavy or difficult to operate.
If you’re unsure, remove the equipment and seek advice from the roof manufacturer or installer.
9. Installing Campervan Roof Bars and Rails
Correct installation is essential for safe operation.
The installation process varies depending on the vehicle and mounting system.
Check Compatibility First
Confirm that every component is compatible with the vehicle and roof.
This includes the bars, feet, fitting kits and mounting rails.
Use Approved Mounting Points
Where factory mounting points are available, use the fittings specified for the vehicle.
For pop-top roofs, follow the roof manufacturer’s approved mounting arrangements.
Protect Against Water Ingress
Any installation involving holes or fixings through the roof requires appropriate weatherproofing.
Incorrect sealing can lead to leaks and damage to the roof structure.
Follow Torque Specifications
Mounting hardware should be tightened according to the manufacturer’s instructions.
Overtightening can damage components, while undertightening may allow movement.
Check the Finished Installation
Inspect the rack for secure attachment before loading it.
Where installation involves modifying a pop-top roof, professional fitting is advisable.
10. How Roof Racks Affect Fuel Economy and Vehicle Height
Adding equipment to the roof changes how your campervan behaves on the road.
Fuel Consumption
Roof bars and equipment can increase aerodynamic drag.
This may result in higher fuel consumption, particularly at motorway speeds.
Aerodynamic bars can help reduce wind resistance, but they cannot eliminate it.
Wind Noise
Some roof rack systems produce additional wind noise.
Correct installation and suitable aerodynamic components can help minimise this.
Vehicle Height
Roof racks increase the overall height of your campervan.
A roof box or kayak may add considerably more height than the bars alone.
Always check the total loaded height before travelling beneath bridges, car park barriers or other restrictions.
Vehicle Handling
Carrying weight high on the vehicle raises its centre of gravity.
This can affect handling, particularly during cornering and in strong crosswinds.
Keep loads as low and evenly distributed as the approved rack system allows.
11. Common Campervan Roof Rack Mistakes
Several mistakes can lead to unnecessary expense or safety problems.
Buying incompatible roof bars: Bars and feet must suit the vehicle and mounting arrangement.
Ignoring pop-top restrictions: Not every elevating roof can carry additional equipment.
Exceeding the load limit: Include the weight of the entire rack system, not just the equipment.
Using unsuitable mounting points: Improvised fixings can damage the roof or fail under load.
Forgetting vehicle height: Roof-mounted equipment can create problems at low entrances.
Incorrectly securing equipment: Loads must be properly restrained for road travel.
Raising a loaded pop-top without approval: Additional weight can damage lifting mechanisms.
Neglecting inspections: Fixings and straps should be checked before journeys and periodically during travel.
Planning your roof rack setup carefully helps avoid these issues.
12. Which Campervan Roof Rack Is Best?
The best roof rack depends on your vehicle, roof type and the equipment you want to transport.
For a fixed-roof campervan, a vehicle-specific Thule system may provide a practical solution using approved mounting points.
For a compatible Reimo elevating roof, the Thule WingBar system with Reimo Active Rails may be worth considering.
If you only need to carry equipment occasionally, removable roof bars could provide greater flexibility.
Whatever system you choose, make sure the roof, mounting components and equipment carriers are all compatible.
The safest arrangement is one that meets every applicable load limit and can be used without interfering with the vehicle’s normal operation.
Shop Campervan Roof Racks and Thule Roof Bars at UK Leisure Parts
UK Leisure Parts supplies roof rack components and mounting accessories for suitable campervan conversions.
Explore the Thule WingBar Evo 135cm for aerodynamic roof bars available in black or silver.
For suitable Reimo roof installations, the Reimo Active Rails provide a dedicated mounting option.
You can also explore the Thule WingBar Roof Rack with Reimo Active Rails, which combines roof bars, rails and compatible fitting components.
Individual accessories, including the Thule Fixing Point – 4 Feet and Thule Rapid Kit 187009, are also available.
Browse the elevating roof accessories range for further options.
Make more room for adventure with a campervan roof rack that’s compatible with your vehicle, properly installed and safely loaded.
