Campervan Gas Systems: A Complete Guide to LPG, Gas Lockers and Regulators

A reliable gas system can make campervan life much more convenient. Whether you’re preparing breakfast on a two-burner hob, heating water or using a gas-powered appliance, LPG provides a practical energy source for many campervans and motorhomes.

However, installing gas in a campervan requires careful planning. Unlike portable electrical appliances, a permanently installed LPG system involves pressurised gas, specialist components and important ventilation requirements.

Choosing the correct gas locker, regulator and fittings is essential for a safe, reliable installation.

In this guide, we’ll explain how campervan gas systems work, compare propane and butane, and explore the essential components you’ll need to consider for your conversion.

1. How Does a Campervan Gas System Work?

Most campervan gas systems use liquefied petroleum gas (LPG), typically propane or butane, stored in a suitable cylinder.

The gas travels from the cylinder through a regulator, which reduces its pressure to the level required by compatible appliances.

A typical installation may include:

  • Gas cylinder: Stores the LPG.
  • Gas locker: Provides a dedicated space for the cylinder.
  • Gas regulator: Controls the pressure supplied to appliances.
  • Pigtail hose: Connects the cylinder to the regulator where applicable.
  • Gas pipework: Carries gas to the appliances.
  • Isolation valves: Allow individual appliances to be isolated.
  • Drop-out ventilation: Helps escaped LPG disperse outside the vehicle.
  • Gas appliances: Such as hobs, ovens or compatible heaters.

Every component must be suitable for the particular system, and the complete installation must be correctly designed and tested.

2. Propane vs Butane: Which Is Best for Campervans?

Propane and butane are both commonly used in leisure vehicles, but they behave differently in colder temperatures.

Propane

Propane continues to vaporise effectively at much lower temperatures than butane.

This makes it particularly useful for campervan owners who travel throughout the year.

Advantages include:

  • Better performance during cold weather.
  • Suitable for winter touring.
  • Useful for gas-powered heating and cooking.

Butane

Butane is commonly used for portable camping equipment and leisure vehicle appliances.

It can be suitable for warmer-weather camping, but its ability to supply gas decreases significantly as temperatures approach freezing.

Which Should You Choose?

If you regularly use your campervan during winter, propane is generally the more practical choice.

For occasional summer camping, butane may be suitable.

However, the cylinder connection, regulator and appliances must all be compatible with the selected fuel and operating pressure.

Never assume that different cylinder types or connectors are interchangeable.

3. Why Do Campervans Need Gas Lockers?

A gas locker is a dedicated enclosure designed to store an LPG cylinder safely within a leisure vehicle.

Because LPG vapour is heavier than air, escaped gas can accumulate in low areas if it cannot disperse.

A properly designed cylinder compartment helps separate the gas supply from the living area and provides suitable ventilation to the outside.

Important Gas Locker Features

Depending on the installation, a suitable locker may require:

  • A gas-tight separation from the vehicle interior.
  • Appropriate low-level ventilation to the outside.
  • Secure cylinder restraints.
  • Suitable access for cylinder replacement.
  • Protection against damage and movement.
  • Adequate space for the regulator and connections.

The exact requirements depend on the cylinder, locker design and applicable leisure vehicle standards.

Campingaz 907 Gas Locker

UK Leisure Parts supplies a Campingaz 907 Gas Locker designed to accommodate a compatible Campingaz 907 cylinder.

Its listed dimensions include approximately 240mm width, 345mm height and 297mm depth including the door.

This compact format can be useful where space is limited.

However, purchasing a dedicated locker doesn’t automatically make an installation compliant. The ventilation, sealing, cylinder restraint and overall system must also meet the relevant requirements.

4. Understanding Campervan Gas Regulators

A gas regulator is one of the most important components in an LPG system.

Gas inside a cylinder is stored at a pressure that varies with fuel type and temperature.

The regulator reduces this pressure to a controlled outlet pressure suitable for the connected appliances.

Many modern UK leisure vehicle appliances are designed for a nominal 30mbar regulated LPG supply, but you must always check the appliance and system specifications.

Bulkhead Regulators

A bulkhead regulator is mounted securely within a suitable installation rather than attaching directly to the cylinder valve.

The cylinder is then connected using a compatible high-pressure hose, often called a pigtail.

UK Leisure Parts stocks a Truma Bulkhead Regulator within its gas accessories range.

When selecting a regulator, check its outlet pressure, flow capacity, inlet connection and suitability for the intended installation.

A regulator must never be chosen based on appearance or connector size alone.

5. What Is a Gas Pigtail?

A gas pigtail is a flexible connection used between an LPG cylinder and a suitable regulator.

It allows the cylinder to be connected without placing unnecessary strain on rigid components.

Different cylinders may require different connection types.

For example, UK Leisure Parts lists a 450mm Butane Pigtail within its campervan gas accessories range.

When selecting a pigtail, consider the cylinder connection, regulator compatibility, pressure rating and manufacturer requirements.

Flexible gas hoses should also be inspected and replaced according to the manufacturer’s instructions and any applicable service-life requirements.

Damaged or unsuitable hoses must not be used.

6. What Are Campervan Gas Drop-Out Vents?

Drop-out vents are designed to provide a low-level route for escaped LPG to disperse outside the vehicle.

This is important because LPG vapour is heavier than air.

Unlike warm air, which naturally rises, leaked LPG can collect near the floor.

Choosing a Drop-Out Vent

The correct vent depends on the gas locker or compartment design and the ventilation requirements of the installation.

UK Leisure Parts supplies several options, including:

  • Black 75 × 35mm drop-out vents.
  • Black 75 × 75mm drop-out vents.
  • White 75 × 35mm drop-out vents.
  • White 75 × 75mm drop-out vents.

These are available within the UK Leisure Parts gas category.

Importantly, the physical dimensions of a vent do not necessarily indicate its effective free ventilation area.

A qualified installer should determine the required ventilation arrangement and ensure it cannot be obstructed.

Gas locker ventilation and general living-space ventilation are also different requirements. One should not be treated as a substitute for the other.

7. Gas Hobs and Cooking Appliances

One of the most common reasons for installing LPG in a campervan is cooking.

Gas hobs offer convenient heat control without requiring a large inverter or substantial electrical supply.

Two-Burner Campervan Hobs

A two-burner hob is a popular option for compact campervan kitchens.

It allows you to prepare meals using two pans while occupying relatively little worktop space.

Combined Hob and Sink Units

Some campervan appliances combine a gas hob and sink within a single compact unit.

This can help maximise available kitchen space.

UK Leisure Parts stocks a selection of campervan hobs and cooking appliances, including Dometic and SMEV options.

Before choosing an appliance, check its dimensions, gas requirements, ventilation clearances and installation instructions.

Only appliances approved for the intended leisure vehicle application should be considered.

8. Gas Isolation Valves and Pipework

A properly designed gas system needs suitable means of isolating the gas supply.

Individual appliance isolation valves can allow a particular appliance to be shut off without necessarily disconnecting the entire system.

UK Leisure Parts lists components including single gas stop valves, manifolds, copper pipework and fittings.

These products can be found in the gas fittings and accessories collection.

However, pipework sizing, routing, joint selection and valve positioning require specialist knowledge.

Poorly made connections can create serious leak risks.

For that reason, fixed LPG pipework and associated fittings should be specified and installed by a suitably qualified professional.

9. Campervan Gas Safety: What You Need to Know

Gas systems can be safe and reliable when correctly designed, installed and maintained.

However, faults can create risks including fire, explosion and carbon monoxide poisoning.

Use a Qualified Installer

For a permanent campervan LPG installation, use a professional with appropriate leisure vehicle LPG competence.

Where Gas Safe registration is legally required, ensure the engineer holds the relevant registration and qualifications.

Install a Carbon Monoxide Alarm

A suitable carbon monoxide alarm is an important safety measure wherever fuel-burning appliances are used.

Carbon monoxide is colourless and odourless, so it cannot be detected reliably by smell.

Follow the alarm manufacturer’s positioning instructions.

A carbon monoxide alarm does not detect LPG leaks unless it is specifically designed to do so.

Never Block Ventilation

Gas lockers and appliances require appropriate ventilation.

Never cover vents to reduce draughts or create additional storage space.

Arrange Regular Inspections

Have the gas system inspected and maintained according to the appliance and installation manufacturers’ guidance.

Know What to Do If You Smell Gas

If you suspect an LPG leak, stop using gas appliances and avoid flames, smoking or operating electrical switches.

If it is safe to do so, shut off the gas supply, leave the vehicle and keep others away.

Seek assistance from a qualified professional before using the system again.

Never use a naked flame to check for leaks.

10. Gas vs Electric Cooking in a Campervan

Not every campervan needs a permanent LPG installation.

Electric cooking has become increasingly popular, particularly in conversions with large lithium battery banks.

Advantages of Gas Cooking

  • Doesn’t require a large inverter.
  • Offers responsive heat control.
  • Can be practical for off-grid touring.
  • Familiar cooking experience.

Advantages of Electric Cooking

  • No onboard LPG cylinder required for cooking.
  • Fewer gas-specific installation components.
  • Suitable for campervans with adequate electrical capacity.
  • Induction hobs can provide efficient, controllable cooking.

Which Is Better?

Gas may be particularly practical for campervan owners who regularly travel off-grid and want to minimise electrical demand.

Electric cooking may suit those who frequently use campsite hook-ups or have a suitably designed high-capacity electrical system.

The best choice depends on your travel habits, available space and overall conversion design.

11. Common Campervan Gas Installation Mistakes

Several mistakes can compromise the safety or reliability of an LPG system.

Using an unsuitable cylinder compartment: A standard cupboard is not automatically an appropriate gas locker.

Incorrect regulator selection: The regulator must match the system’s pressure and flow requirements.

Incompatible cylinder connections: Different LPG cylinders can use different fittings.

Poor ventilation: Incorrect or obstructed vents can allow gas to accumulate.

Unsecured cylinders: Cylinders must be properly restrained during travel.

Using unsuitable appliances: Domestic equipment isn’t necessarily approved for campervan use.

Skipping professional testing: A completed system requires appropriate inspection and testing before use.

Ignoring maintenance: Hoses, regulators, appliances and connections need periodic attention.

The safest approach is to plan the entire LPG system before purchasing individual components.

12. Planning Your Campervan Gas System

Before starting a conversion, decide which appliances will require gas.

This will help determine the appropriate cylinder capacity, storage location and system requirements.

Consider the following:

  1. Which gas appliances will be installed?
  2. Will the campervan be used during winter?
  3. How much storage space is available for the cylinder?
  4. Where can a compliant gas locker be positioned?
  5. What ventilation will the installation require?
  6. How will appliances be isolated and serviced?
  7. Who will design, install and test the system?

Planning these details early can help avoid expensive changes after furniture and kitchen units have been installed.

Shop Campervan Gas Lockers, Regulators and Fittings at UK Leisure Parts

Whether you’re planning a new campervan conversion or replacing components in an existing system, UK Leisure Parts supplies a range of LPG accessories for leisure vehicles.

Explore the Campingaz 907 Gas Locker for compatible cylinder storage applications.

You can also browse the complete campervan gas accessories range for Truma regulators, pigtails, drop-out vents, isolation valves and fittings.

For cooking equipment, visit the campervan hobs collection to explore available appliances.

A well-planned LPG system can make campervan cooking and touring more convenient, but correct component selection, professional installation and ongoing maintenance should always come first.

Website designed & powered by SK Web Design